Page 97 of 101

Re: Backup 6.0 - Updated 01/07/2014

Posted: Fri Mar 23, 2018 8:02 am
by Peke
Just checked and I already have that value set.

Re: Backup 6.0 - Updated 01/07/2014

Posted: Tue Mar 27, 2018 10:56 pm
by gpzbc
Thanks for posting the solution. I'm guessing someone else will need it at some point.

Backup Instructions

Posted: Sun Jun 03, 2018 3:59 pm
by compupix
Is there an instruction manual? I've searched and this 96 page thread is the closest thing I've found.
What is Output Archive? Why does it have a browse feature? Why doesn't it go to the Output Path? Why can't I dot it? What is the purpose of "Second archive?" Why multiple paths?

With answers to those questions, I could probably figure out why I'm getting an error: "Output path currently contains 11Mb which could be deleted. Do you wish to continue?"

Thanks!

Re: Backup 6.0 - Updated 01/07/2014

Posted: Wed Dec 05, 2018 11:51 am
by martialartsguy
I'm getting a VBScript runtime error:
https://imgur.com/a/nqXnYvq

This is for Line 1724, Column 2, which as far as my limited knowledge of scripting goes, refers to deleting files and folders.

Any ideas on how to fix this?

Back up my media library...

Posted: Thu Mar 21, 2019 12:42 pm
by Mikey1969
Hi all,
I'm running MM 4.1.23.1881, and running the 'Backup' addon (v6.0). I have two issues that I'm running into. All I really want to do is back up my music and settings, so if someone has another recommendation, I'm open to suggestions, since it's entirely possible that I'm doing this the hard way.

Anyway, here are the issues:

1. When trying to configure the 'Backup Archive' (Which I take to be the music itself, but I could be wrong), I can set the floder, but I can't click on the radio button to turn the option on.

2. When shutting down MM (Which is when I have the backups scheduled to happen), "Backup canceled because output folder already exists", which seems kind of silly, since most people want to back things up more than once in their lifetimes.

Anyway, I haven't figured out what I'm doing wrong, and any help would be greatly appreciated.

Re: Backup 6.0 - Updated 01/07/2014

Posted: Thu Mar 21, 2019 2:42 pm
by Mikey1969
OK, so in other words, this addon has no support, at least looking at this thread and the age of the addon... I guess I'll just do the backups thru Windows, no big deal.

Re: Backup 6.0 - Updated 01/07/2014

Posted: Sat Mar 23, 2019 9:11 pm
by Stigg
Mikey1969 wrote: Thu Mar 21, 2019 2:42 pm OK, so in other words, this addon has no support, at least looking at this thread and the age of the addon... I guess I'll just do the backups thru Windows, no big deal.
Hi Mikey.

I still use the Backup Addon, but I never set it to backup at shutdown, as I always used to get errors. I don't use Auto either.
I just click on the Backup icon from time to time, and I never have a problem.

Image

Image

Re: Backup 6.0 - Updated 01/07/2014

Posted: Mon Apr 29, 2019 6:40 am
by zopfan
While restoring, I'm getting this error:

Image (Image https://photos.app.goo.gl/PgYZCio5UqY5bYW48isn't working)

Permission Denied Error.
Code: 800A0046

Is there a user manual for this script anywhere?

Re: Backup 6.0 - Updated 01/07/2014

Posted: Mon Apr 29, 2019 7:22 am
by zopfan
Is there a way to receive [Paid Help]. The way many free forums have started.

People are ready to help free. But they give priority to who are ready to buy them a cup of coffee or, may be, a beer.

Re: Backup 6.0 - Updated 01/07/2014

Posted: Mon Apr 29, 2019 5:30 pm
by Peke
Hi,
Try contact Trix directly https://www.mediamonkey.com/forum/membe ... ile&u=2191 I guess it is the best approach.

Re: Backup 6.0 - Updated 01/07/2014

Posted: Tue Apr 30, 2019 7:35 pm
by dypsis
I think you might find that many users manually restore, as Restore.vbs has been troublesome.
  • Double click MediaMonkey.reg to add the data to the Registry.
  • Copy and replace MediaMonkey.ini to either C:\Users\[Username]\AppData\Roaming\MediaMonkey or C:\Users\[Username]\AppData\Local\MediaMonkey.
    Just check the above location for you.
  • Copy and replace MM.DB to either C:\Users\[Username]\AppData\Roaming\MediaMonkey or C:\Users\[Username]\AppData\Local\MediaMonkey.
    It should be the same location as MediaMonkey.ini
  • The Plugins, Scripts and Skins folders are copied and replaced at:
    C:\Program Files (x86)\MediaMonkey\Skins for a 64-bit operating system or C:\Program Files\MediaMonkey\Skins for a 32-bit operating system.
  • The MediaMonkey folder is copied and replaced at: C:\ProgramData\MediaMonkey
    I doubt if that last one changes too much.

Re: Backup 6.0 - Updated 01/07/2014

Posted: Tue Apr 30, 2019 10:39 pm
by zopfan
dypsis wrote: Tue Apr 30, 2019 7:35 pm I think you might find that many users manually restore, as Restore.vbs has been troublesome.
  • Double click MediaMonkey.reg to add the data to the Registry.
  • Copy and replace MediaMonkey.ini to either C:\Users\[Username]\AppData\Roaming\MediaMonkey or C:\Users\[Username]\AppData\Local\MediaMonkey.
    Just check the above location for you.
  • Copy and replace MM.DB to either C:\Users\[Username]\AppData\Roaming\MediaMonkey or C:\Users\[Username]\AppData\Local\MediaMonkey.
    It should be the same location as MediaMonkey.ini
  • The Plugins, Scripts and Skins folders are copied and replaced at:
    C:\Program Files (x86)\MediaMonkey\Skins for a 64-bit operating system or C:\Program Files\MediaMonkey\Skins for a 32-bit operating system.
  • The MediaMonkey folder is copied and replaced at: C:\ProgramData\MediaMonkey
    I doubt if that last one changes too much.
Thank you very much. You solved major part of the problem.

Re: Backup 6.0 - Updated 01/07/2014

Posted: Wed May 01, 2019 3:00 am
by dypsis
What I would suggest, if you want to find your locations super fast, is to install Everything, which is a search engine for your computer. In fact, you don't even have to install it. You can get the standalone version if you want.

[SOLVED] Path Not Found (Backup Script)

Posted: Sat May 11, 2019 9:17 pm
by compupix
At time of closing Media Monkey version 4.1.21.1875
I get the following error:
Script: C:\Users\Drew\AppData\Roaming\MediaMonkey\Scripts\Abackup2.vbs
Line: 328
Char: 11
Error: Path not found
Code: 800A004C
Source: Microsoft6 VBScript runtime error

Here are lines from Abackup2.vbs
327 For Each fil In par.Files
328 Call fso.CopyFile(fil.Path,m3up,True)
329 Call fso.DeleteFile(fil.Path,True)
330 Next

What file is it having problems finding? Where do I correct that setting?

Windows Version 10.0.17763 Build 17763
Thanks!

Re: Path Not Found

Posted: Sat May 11, 2019 11:59 pm
by dypsis
It's Trixmoto's Backup script. probably located here at:
C:\Users\[Username]\AppData\Roaming\MediaMonkey\Scripts
or
C:\Program Files (x86)\MediaMonkey\Scripts
C:\Program Files\MediaMonkey\Scripts

If you run the backup manually, do you get that error?
I always had trouble with the "Auto backup on shutdown" setting, so I don't use that setting.

My settings are here.