Further major improvements to the script
The current version of the script is optimised for MediaMonkey 4 and above.
If you haven't used a Beta just follow the instructions below, it's easy. Try a Beta, they're safe and you'll be helping with the development.
Release improvements:
- The ability to connect to one of four pre-configured SqueezeBox players each session - Connection info and selection on the Options page
- Added the ability to log into a password protected LMS/Squeezebox system. Data entered on the MonkeySqueeze Options page
- General tidy of the script
- Roll back to V3.0.1 - Changes in V3.0.1.120314Beta removed
Known Issues:
None at this stage. Make sure you read the tool tips on the options page.
To use this version:
Copy the script to Notepad and save as MonkeySqueeze.vbs to one one of the following locations:
C:\Program Files\MediaMonkey\Scripts\Auto or C:\Program Files (x86)\MediaMonkey\Scripts\Auto
Make sure you disable or remove the existing MonkeySqueeze.vbs
If you use this script please report on this forum if it runs OK or if you had any issues. Feedback is appreciated so I can implement changes before any official release.
Code: Select all
'%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
'
' MonkeySqueeze V3.1.0.150521Beta
'
' MOD DATE: 21.05.2015
'
' Script: Development has occurred in two distinct stages: As Squeezebox Controller from 2007 to 2009; and as MonkeySqueeze from 2011 on.
' Major changes have occurred to the script since 2011 and it bears little resemblance to the original Squeezebox Controller.
'
' DATE STARTED: 26.09.2007
'
' Squeezebox Controller: Todd Nemeth Mods: Baz, Big_Berny, Peke, trixmoto, debacle, mccstumble
' MonkeySqueeze: Gingernut63, booblers, Katteman
'
' COMMENT:
' - You will also need Logitech Media Server (SqueezeBox Server) installed and running
' - Optional: Install and run SqueezePlay or SoftSqueeze
' - After installation the options page for this script is located at Tools > Options > MonkeySqueeze
'
'%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Option Explicit
Public EndOfTrack, LMScount, LMSpaths()
Const ForReading = 1, ForWriting = 2, ForAppending = 8
Dim onMonkeySqueezeIcon
Dim offMonkeySqueezeIcon
'**************************************************************
Sub OnStartup
Dim ind, Mnu
Dim UI : Set UI = SDB.UI
onMonkeySqueezeIcon = SDB.RegisterIcon("Scripts\Auto\MonkeySqueezeOn.ico", 0)
If onMonkeySqueezeIcon < 0 Then
onMonkeySqueezeIcon = 74 'unlocked icon if it doesn't exist
End If
offMonkeySqueezeIcon = SDB.RegisterIcon("Scripts\Auto\MonkeySqueezeOff.ico", 0)
If offMonkeySqueezeIcon < 0 Then
offMonkeySqueezeIcon = 75 'locked icon if it doesn't exist
End If
Set Mnu = UI.AddMenuItem( UI.Menu_TbStandard, 0, 0)
Mnu.Caption = "MonkeySqueeze"
Mnu.UseScript = Script.ScriptPath
Mnu.OnClickFunc = "SyncToggle"
Mnu.IconIndex = offMonkeySqueezeIcon
Mnu.Hint = "Enable/Disable MonkeySqueeze"
Set SDB.Objects("MonkeySqueezeIcon") = Mnu 'save a reference to it so we can change the icon later.
SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
ind = SDB.UI.AddOptionSheet("MonkeySqueeze",Script.ScriptPath,"InitSheet","SaveSheet",-2)
'logme(slimRequest(formatCommand("""version"",""?""")))
End Sub
'**************************************************************
Sub InitSheet(Sheet)
Dim Panel1, Panel2, Panel3, Panel4, Panel5, Btn1, Checkbox1, Checkbox2, Checkbox3, Checkbox4, Edit1, Edit2, Edit3, Edit4, Edit5, Edit6, Edit7, Edit8, Edit9, Edit10, Edit11, Edit12, Edit13, Edit14, Combo1
Set Panel1 = SDB.UI.NewGroupBox(Sheet)
Panel1.Common.SetRect 10,10,450,50
Panel1.Caption = "MonkeySqueeze v3.1.0.150521Beta."
With SDB.UI.NewLabel(Panel1)
.Common.SetRect 15,22,590,20
.Caption = "This script allows MediaMonkey to play music on a SqueezeBox system"
End With
Set Btn1 = SDB.UI.NewButton(Panel1)
Btn1.Common.SetRect 370,15,65,25
Btn1.Caption = "User Guide"
Btn1.Common.Hint = "Click and then open MonkeySqueeze_UserGuide.pdf"
Script.RegisterEvent Btn1, "OnClick", "UserGuide"
Set Panel2 = SDB.UI.NewGroupBox(Sheet)
Panel2.Common.SetRect 10,70,450,80
Panel2.Caption = "General Settings"
Set CheckBox1 = SDB.UI.NewCheckBox(Panel2)
CheckBox1.Common.SetRect 15,20,150,20
CheckBox1.Checked = SDB.IniFile.BoolValue("MonkeySqueeze","PowerToggle")
CheckBox1.Common.ControlName = "EnablePT"
CheckBox1.Common.Hint = SDB.Localize("When selected if MonkeySqueeze is enabled, the primary SqueezeBox device will power on, and on/off at startup/shutdown. When MonkeySqueeze is disabled, primary SqueezeBox device will power off. Does not work if SqueezePlay is the primary device.")
CheckBox1.Caption = SDB.Localize("Enable Power Toggle")
Set CheckBox2 = SDB.UI.NewCheckBox(Panel2)
CheckBox2.Common.SetRect 15,47,80,20
CheckBox2.Checked = SDB.IniFile.BoolValue("MonkeySqueeze","Login")
CheckBox2.Common.ControlName = "EnableLog"
CheckBox2.Common.Hint = SDB.Localize("This will enable MonkeySqueeze to log into a password protected LMS/SqueezeBox system.")
CheckBox2.Caption = SDB.Localize("Enable Login")
Script.RegisterEvent CheckBox2.Common, "OnClick", "LogClick"
With SDB.UI.NewLabel(Panel2)
.Common.SetRect 115,50,60,20
.Caption = "Username:"
End With
Set Edit1 = SDB.UI.NewEdit(Panel2)
Edit1.Common.ControlName = "SqueezeBoxUser"
Edit1.Common.SetRect 172,47,95,25
Edit1.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxUser")
If Edit1.Text = "" Then
Edit1.Text = ""
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxUser") = ""
End If
Edit1.Common.Hint = "Type the LMS username here"
With SDB.UI.NewLabel(Panel2)
.Common.SetRect 280,50,60,20
.Caption = "Password:"
End With
Set Edit2 = SDB.UI.NewEdit(Panel2)
Edit2.Common.ControlName = "SqueezeBoxPass"
Edit2.Common.SetRect 334,47,95,25
Edit2.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPass")
If Edit2.Text = "" Then
Edit2.Text = ""
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPass") = ""
End If
Edit2.PasswordChar = "*"
Edit2.Common.Hint = "Type the LMS password here"
Edit1.Common.Enabled = CheckBox2.Checked
Edit2.Common.Enabled = CheckBox2.Checked
Set Panel3 = SDB.UI.NewGroupBox(Sheet)
Panel3.Common.SetRect 10,160,450,105
Panel3.Caption = "LMS IP Address and HTTP Port"
With SDB.UI.NewLabel(Panel3)
.Multiline = True
.Common.SetRect 15,20,420,50
.Caption = "Open the LMS (SqueezeBox Server) Web Control page > Settings > Information tab and find the Server IP Address, e.g. 192.168.0.102 and enter below. The default HTTP Port number is 9000. See user guide if you wish to change it."
End With
With SDB.UI.NewLabel(Panel3)
.Common.SetRect 15,74,70,20
.Caption = "IP Address:"
End With
Set Edit3 = SDB.UI.NewEdit(Panel3)
Edit3.Common.ControlName = "SqueezeBoxIP"
Edit3.Common.SetRect 75,70,95,25
Edit3.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxIP")
If Edit3.Text = "" Then
Edit3.Text = "XXX.XXX.XXX.XXX"
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxIP") = "XXX.XXX.XXX.XXX"
End If
Edit3.Common.Hint = "Copy and paste the LMS IP Address or Hostname here"
With SDB.UI.NewLabel(Panel3)
.Common.SetRect 215,74,70,20
.Caption = "HTTP Port No:"
End With
Set Edit4 = SDB.UI.NewEdit(Panel3)
Edit4.Common.ControlName = "SqueezeBoxPort"
Edit4.Common.SetRect 287,70,40,25
Edit4.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPort")
If Edit4.Text = "" Then
Edit4.Text = "9000"
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPort") = "9000"
End If
Edit4.Common.Hint = "HTTP port default is 9000. View the port number in LMS: Web Control page > Settings > Information tab and change if required"
Set Panel4 = SDB.UI.NewGroupBox(Sheet)
Panel4.Common.SetRect 10,275,450,195
Panel4.Caption = "SqueezeBox Player Names and MAC Addresses"
With SDB.UI.NewLabel(Panel4)
.Multiline = True
.Common.SetRect 15,20,420,60
.Caption = "The Name and MAC address of the players (Touch, SqueezePlay, etc...) to connect to. Only one player connection per session."
End With
With SDB.UI.NewLabel(Panel4)
.Common.SetRect 15,59,100,20
.Caption = "MediaMonkey is connected to:"
End With
Set Combo1 = SDB.UI.NewDropdown(Panel4)
Combo1.Common.SetRect 162,56,75,20
Combo1.Style = 1 ' List style 1 or 2
Combo1.AddItem "Player 1"
Combo1.AddItem "Player 2"
Combo1.AddItem "Player 3"
Combo1.AddItem "Player 4"
Combo1.Common.ControlName = "SqueezeBoxPlayerNo"
Combo1.ItemIndex = SDB.IniFile.IntValue("MonkeySqueeze","SqueezeBoxPlayerNo")'Players 1 to 4 use integer values 0 to 3
Combo1.Common.Hint = "Select the SqueezeBox Player you wish to connect to"
Script.RegisterEvent Combo1.Common, "OnClick", "PlayerSelect"
Combo1.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
With SDB.UI.NewLabel(Panel4)
.Common.SetRect 15,89,60,20
.Caption = "Player 1 Name:"
End With
Set Edit5 = SDB.UI.NewEdit(Panel4)
Edit5.Common.ControlName = "SqueezeBoxPlayer1"
Edit5.Common.SetRect 95,85,110,25
Edit5.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer1")
If Edit5.Text = "" Then
Edit5.Text = " "
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer1") = " "
End If
Edit5.Common.Hint = "Open the LMS Web Control page > Settings page > Information tab > copy & paste the Player Name here"
With SDB.UI.NewLabel(Panel4)
.Common.SetRect 15,112,55,20
.Caption = "MAC Address:"
End With
Set Edit6 = SDB.UI.NewEdit(Panel4)
Edit6.Common.ControlName = "SqueezeBoxMAC"
Edit6.Common.SetRect 95,108,110,25
Edit6.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC")
If Edit6.Text = "" Then
Edit6.Text = "xx:xx:xx:xx:xx:xx"
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC") = "xx:xx:xx:xx:xx:xx"
End If
Edit6.Common.Hint = "Open the LMS Web Control page > Settings page > Information tab > copy & paste the MAC Address that matches the player selected above e.g.06:f4:20:1e:4a:43"
With SDB.UI.NewLabel(Panel4)
.Common.SetRect 240,89,60,20
.Caption = "Player 2 Name:"
End With
Set Edit7 = SDB.UI.NewEdit(Panel4)
Edit7.Common.ControlName = "SqueezeBoxPlayer2"
Edit7.Common.SetRect 320,85,110,25
Edit7.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer2")
If Edit7.Text = "" Then
Edit7.Text = ""
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer2") = ""
End If
Edit7.Common.Hint = "Open the LMS Web Control page > Settings page > Information tab > copy & paste the Player Name here"
With SDB.UI.NewLabel(Panel4)
.Common.SetRect 240,112,55,20
.Caption = "MAC Address:"
End With
Set Edit8 = SDB.UI.NewEdit(Panel4)
Edit8.Common.ControlName = "SqueezeBoxMAC2"
Edit8.Common.SetRect 320,108,110,25
Edit8.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC2")
If Edit8.Text = "" Then
Edit8.Text = "xx:xx:xx:xx:xx:xx"
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC2") = "xx:xx:xx:xx:xx:xx"
End If
Edit8.Common.Hint = "Open the LMS Web Control page > Settings page > Information tab > copy & paste the MAC Address that matches the player selected above e.g.06:f4:20:1e:4a:43"
With SDB.UI.NewLabel(Panel4)
.Common.SetRect 15,142,60,20
.Caption = "Player 3 Name:"
End With
Set Edit9 = SDB.UI.NewEdit(Panel4)
Edit9.Common.ControlName = "SqueezeBoxPlayer3"
Edit9.Common.SetRect 95,138,110,25
Edit9.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer3")
If Edit9.Text = "" Then
Edit9.Text = ""
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer3") = ""
End If
Edit9.Common.Hint = "Open the LMS Web Control page > Settings page > Information tab > copy & paste the Player Name here"
With SDB.UI.NewLabel(Panel4)
.Common.SetRect 15,165,55,20
.Caption = "MAC Address:"
End With
Set Edit10 = SDB.UI.NewEdit(Panel4)
Edit10.Common.ControlName = "SqueezeBoxMAC3"
Edit10.Common.SetRect 95,161,110,25
Edit10.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC3")
If Edit10.Text = "" Then
Edit10.Text = "xx:xx:xx:xx:xx:xx"
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC3") = "xx:xx:xx:xx:xx:xx"
End If
Edit10.Common.Hint = "Open the LMS Web Control page > Settings page > Information tab > copy & paste the MAC Address that matches the player selected above e.g.06:f4:20:1e:4a:43"
With SDB.UI.NewLabel(Panel4)
.Common.SetRect 240,142,60,20
.Caption = "Player 4 Name:"
End With
Set Edit11 = SDB.UI.NewEdit(Panel4)
Edit11.Common.ControlName = "SqueezeBoxPlayer4"
Edit11.Common.SetRect 320,138,110,25
Edit11.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer4")
If Edit11.Text = "" Then
Edit11.Text = ""
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer4") = ""
End If
Edit11.Common.Hint = "Open the LMS Web Control page > Settings page > Information tab > copy & paste the Player Name here"
With SDB.UI.NewLabel(Panel4)
.Common.SetRect 240,165,55,20
.Caption = "MAC Address:"
End With
Set Edit12 = SDB.UI.NewEdit(Panel4)
Edit12.Common.ControlName = "SqueezeBoxMAC4"
Edit12.Common.SetRect 320,161,110,25
Edit12.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC4")
If Edit12.Text = "" Then
Edit12.Text = "xx:xx:xx:xx:xx:xx"
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC4") = "xx:xx:xx:xx:xx:xx"
End If
Edit12.Common.Hint = "Open the LMS Web Control page > Settings page > Information tab > copy & paste the MAC Address that matches the player selected above e.g.06:f4:20:1e:4a:43"
Combo1.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
Edit6.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
Edit8.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
Edit10.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
Edit12.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
Set Panel5 = SDB.UI.NewGroupBox(Sheet)
Panel5.Common.SetRect 10,480,450,145
Panel5.Caption = "LMS on a Linux or Windows Server/NAS"
With SDB.UI.NewLabel(Panel5)
.Multiline = True
.Common.SetRect 15,20,420,60
.Caption = "For Linux devices the media folder address in LMS uses forward slashes. e.g. /media/Music. Windows devices use back slashes (\) for all addresses"
End With
Set CheckBox3 = SDB.UI.NewCheckBox(Panel5)
CheckBox3.Common.SetRect 15,53,120,20
CheckBox3.Checked = SDB.IniFile.BoolValue("MonkeySqueeze","NAS")
CheckBox3.Common.ControlName = "EnableNAS"
CheckBox3.Common.Hint = SDB.Localize("Select if using LMS on a Linux or Windows Server/NAS device. See user guide for more details")
CheckBox3.Caption = SDB.Localize("Enable Server/NAS")
Script.RegisterEvent CheckBox3.Common, "OnClick", "NASClick"
Set CheckBox4 = SDB.UI.NewCheckBox(Panel5)
CheckBox4.Common.SetRect 200,53,260,20
CheckBox4.Checked = SDB.IniFile.BoolValue("MonkeySqueeze","Synology")
CheckBox4.Common.ControlName = "EnableSynology"
CheckBox4.Common.Hint = SDB.Localize("Select if using Squeezebox Server prior to v7.5.1. Tested on Synology devices only")
CheckBox4.Caption = SDB.Localize("LMS is prior to v7.5.1 (Linux device only)")
With SDB.UI.NewLabel(Panel5)
.Common.SetRect 15,84,70,20
.Caption = "MediaMonkey Music Folder:"
End With
Set Edit13 = SDB.UI.NewEdit(Panel5)
Edit13.Common.ControlName = "MediaMonkeyMF"
Edit13.Common.SetRect 148,80,281,25
Edit13.Text = SDB.IniFile.StringValue("MonkeySqueeze","MediaMonkeyMF")
If Edit13.Text = "" Then
Edit13.Text = "\\Server\folder or X:\__\__(mapped)"
SDB.IniFile.StringValue("MonkeySqueeze","MediaMonkeyMF") = "\\Server\folder or X:\__\__(mapped)"
End If
Edit13.Common.Hint = "Copy from MediaMonkey > File > Add/Rescan Folders or the Path column in the Track Browser section"
With SDB.UI.NewLabel(Panel5)
.Common.SetRect 15,114,70,20
.Caption = "LMS Media Folder:"
End With
Set Edit14 = SDB.UI.NewEdit(Panel5)
Edit14.Common.ControlName = "SqueezeBoxMF"
Edit14.Common.SetRect 105,110,281,25
Edit14.Text = SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMF")
If Edit14.Text = "" Then
Edit14.Text = "/___ /___ Linux, or \ ___\ ___ Windows"
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMF") = "/___ /___ Linux, or \ ___\ ___ Windows"
End If
Edit14.Common.Hint = "Copy and Paste from: LMS Web Page > Settings > Basic Settings tab > Music Folder"
CheckBox4.Common.Enabled = CheckBox1.Checked
Edit13.Common.Enabled = CheckBox1.Checked
Edit14.Common.Enabled = CheckBox1.Checked
End Sub
'**************************************************************
Sub LogClick(ChB)
Dim Edt1, Edt2
Set Edt1 = ChB.Common.TopParent.Common.ChildControl("SqueezeBoxUser")
Set Edt2 = ChB.Common.TopParent.Common.ChildControl("SqueezeBoxPass")
Edt1.Common.Enabled = ChB.Checked
Edt2.Common.Enabled = ChB.Checked
End Sub
'**************************************************************
Sub PlayerSelect(DD)
Dim Cmbo1, Edt6, Edt8, Edt10, Edt12
Set Cmbo1 = DD.Common.TopParent.Common.ChildControl("SqueezeBoxPlayerNo")
Set Edt6 = DD.Common.TopParent.Common.ChildControl("SqueezeBoxMAC")
Set Edt8 = DD.Common.TopParent.Common.ChildControl("SqueezeBoxMAC2")
Set Edt10 = DD.Common.TopParent.Common.ChildControl("SqueezeBoxMAC3")
Set Edt12 = DD.Common.TopParent.Common.ChildControl("SqueezeBoxMAC4")
Cmbo1.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
Edt6.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
Edt8.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
Edt10.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
Edt12.Common.Enabled = SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
End Sub
'**************************************************************
Sub NASClick(ChB)
Dim ChB4, Edt13, Edt14
Set ChB4 = ChB.Common.TopParent.Common.ChildControl("EnableSynology")
Set Edt13 = ChB.Common.TopParent.Common.ChildControl("MediaMonkeyMF")
Set Edt14 = ChB.Common.TopParent.Common.ChildControl("SqueezeBoxMF")
ChB4.Common.Enabled = ChB.Checked
Edt13.Common.Enabled = ChB.Checked
Edt14.Common.Enabled = ChB.Checked
End Sub
'**************************************************************
Sub SaveSheet(Sheet)
SDB.IniFile.BoolValue("MonkeySqueeze","PowerToggle") = Sheet.Common.ChildControl( "EnablePT").Checked
SDB.IniFile.IntValue("MonkeySqueeze","SqueezeBoxPlayerNo") = Sheet.Common.ChildControl("SqueezeBoxPlayerNo").ItemIndex
SDB.IniFile.BoolValue("MonkeySqueeze","Login") = Sheet.Common.ChildControl( "EnableLog").Checked
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxUser") = Sheet.Common.ChildControl("SqueezeBoxUser").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPass") = Sheet.Common.ChildControl("SqueezeBoxPass").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxIP") = Sheet.Common.ChildControl("SqueezeBoxIP").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPort") = Sheet.Common.ChildControl("SqueezeBoxPort").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer1") = Sheet.Common.ChildControl("SqueezeBoxPlayer1").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC") = Sheet.Common.ChildControl("SqueezeBoxMAC").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer2") = Sheet.Common.ChildControl("SqueezeBoxPlayer2").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC2") = Sheet.Common.ChildControl("SqueezeBoxMAC2").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer3") = Sheet.Common.ChildControl("SqueezeBoxPlayer3").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC3") = Sheet.Common.ChildControl("SqueezeBoxMAC3").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPlayer4") = Sheet.Common.ChildControl("SqueezeBoxPlayer4").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC4") = Sheet.Common.ChildControl("SqueezeBoxMAC4").Text
SDB.IniFile.BoolValue("MonkeySqueeze","NAS") = Sheet.Common.ChildControl( "EnableNAS").Checked
SDB.IniFile.BoolValue("MonkeySqueeze","Synology") = Sheet.Common.ChildControl( "EnableSynology").Checked
SDB.IniFile.StringValue("MonkeySqueeze","MediaMonkeyMF") = Sheet.Common.ChildControl("MediaMonkeyMF").Text
SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMF") = Sheet.Common.ChildControl("SqueezeBoxMF").Text
End Sub
'**************************************************************
Sub UserGuide
On Error Resume Next
Dim OF, FolderToOpen
Set OF = CreateObject("Shell.Application")
FolderToOpen = sdb.ScriptsPath & "Auto\"
OF.Explore FolderToOpen
Set OF = Nothing
End Sub
'**************************************************************
Function SqueezeBoxMode
Dim strRetVal
On Error Resume Next
SqueezeBoxMode = ""
strRetVal = slimRequest(formatCommand("""mode"", ""?"""))
If InStrRev(strRetVal, "play") > 0 Then
SqueezeBoxMode = "play"
ElseIf InStrRev(strRetVal, "stop") > 0 Then
SqueezeBoxMode = "stop"
ElseIf InStrRev(strRetVal, "pause") > 0 Then
SqueezeBoxMode = "pause"
End If
End Function
'**************************************************************
Sub ShowPlayerSettings
Dim Plr, Warning, Res
Warning = ""
Set Plr = SDB.Player
'If Plr.isAutoDJ Then Warning = Warning & vbNewLine & "AutoDJ is on"
If Plr.isCrossFade Then Warning = Warning & vbNewLine & "CrossFade is on"
If Plr.isShuffle Then Warning = Warning & vbNewLine & "Shuffle is on"
If Plr.isEqualizer Then Warning = Warning & vbNewLine & "Equalizer is on"
If Plr.isRepeat Then Warning = Warning & vbNewLine & "Repeat is on"
If Warning <> "" Then
Res = SDB.MessageBox("Selected player settings:" & vbNewLine & _
Warning, mtWarning, Array(mbOk))
End If
End Sub
'**************************************************************
Function SyncToggle( itm )
If SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False Then
SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = True
itm.IconIndex = SDB.RegisterIcon("Scripts\Auto\MonkeySqueezeOn.ico", 0)
Call registerEvents
If SDB.IniFile.BoolValue("MonkeySqueeze","PowerToggle") Then slimRequest(formatCommand("""power"", ""1"""))
ShowPlayerSettings
FillPlaylist
Else
SDB.IniFile.BoolValue("MonkeySqueeze","SyncToggle") = False
itm.IconIndex = SDB.RegisterIcon("Scripts\Auto\MonkeySqueezeOff.ico", 0)
Call unregisterEvents
slimRequest(formatCommand("""stop"""))
If SDB.IniFile.BoolValue("MonkeySqueeze","PowerToggle") Then slimRequest(formatCommand("""power"", ""0"""))
End If
End Function
'**************************************************************
Sub Event_OnPlay
Dim strRetVal, Idx
If (SqueezeBoxMode = "play") And EndOfTrack Then
'*** normal playlist continuation
EndOfTrack = False
Else
'*** SqueezeBox is not playing or new track out of order
Idx = SDB.Player.CurrentSongIndex
slimRequest(formatCommand("""playlist"", ""index"", """ + Cstr(Idx) + """"))
End If
End Sub
'**************************************************************
Sub Event_OnTrackEnd
Dim strRetVal, idx, tim, dur
'*** see if current track ended, then playing is not interrupted
EndOfTrack = True
End Sub
'**************************************************************
Function CheckPath(SongValue)
If Left(SongValue.Path,1) = "?" Then
If SongValue.Cached Then
CheckPath = SongValue.CachedPath
Else
CheckPath = SongValue.Path
End If
Else
CheckPath = SongValue.Path
End If
If SDB.IniFile.BoolValue("MonkeySqueeze","NAS") Then
If SDB.IniFile.BoolValue("MonkeySqueeze","Synology") Then CheckPath = Replace(CheckPath,"\","/")
CheckPath = Replace(CheckPath,SDB.IniFile.StringValue("MonkeySqueeze","MediaMonkeyMF"),SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMF"))
End If
End Function
'**************************************************************
Sub Event_OnStop
slimRequest(formatCommand("""stop"""))
End Sub
'**************************************************************
Sub Event_OnShutdown
On Error Resume Next
slimRequest(formatCommand("""stop"""))
If SDB.IniFile.BoolValue("MonkeySqueeze","PowerToggle") Then slimRequest(formatCommand("""power"", ""0"""))
End Sub
'**************************************************************
Sub Event_OnPause
If SDB.Player.IsPaused Then
slimRequest(formatCommand("""pause"""))
Else
slimRequest(formatCommand("""play"""))
End If
End Sub
'**************************************************************
Sub Event_OnSeek
Dim SBmode, Song, TrackPath, LMStime
SBmode = SqueezeBoxMode
If SBmode = "stop" Then
Set Song = SDB.Player.CurrentSong
TrackPath = CheckPath(Song)
slimRequest(formatCommand("""playlist"", ""play"", """ + perlEscape(TrackPath) + """"))
End If
LMStime = 0.001 * SDB.Player.PlaybackTime
slimRequest(formatCommand("""time"", """ + CStr(LMStime) + """"))
End Sub
'**************************************************************
Function slimRequest(params)
'slimRequest accepts pre-formatted parameter string, returns string of the response'
'logme " >> slimRequest: Begin with " + params
Dim url, prog, objHTTP
Dim cnt : cnt = 0
If SDB.IniFile.BoolValue("MonkeySqueeze","Login") = True Then
url = "http://" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxUser") + ":" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPass") + "@" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxIP") + ":" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPort") + "/jsonrpc.js"
Else
url = "http://" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxIP") + ":" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxPort") + "/jsonrpc.js"
End If
'Set prog = SDB.Objects("LoadXMLBar")
Set prog = SDB.Progress
Set objHTTP = CreateObject("Microsoft.XMLHTTP")
Call objHTTP.open("POST", url, True)
objHTTP.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
objHTTP.setRequestHeader "X-Requested-With", "XMLHttpRequest"
objHTTP.setRequestHeader "User-Agent", "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/13.0.782.112 Safari/535.1"
objHTTP.send(params)
Do While (objHTTP.readyState < 4) And (cnt < 300)
Call SDB.Tools.Sleep(100)
SDB.ProcessMessages
cnt = cnt+1
If prog.Terminate Then
cnt = 300
End If
Loop
If objHTTP.readyState < 4 Then
Set slimRequest = Nothing
Else
slimRequest = objHTTP.responseText
End If
End Function
'*************************************************************
'This is is a JSON RPC call - We're directly calling functions in the Slim::Request module in Perl. See here:
'http://svn.slimdevices.com/repos/slim/7.5/trunk/server/Slim/Control/Request.pm
'the addDispatch section tells you how to use the commands and what the RPC module is looking for in terms of formatting
Function formatCommand(str1)
If SDB.IniFile.IntValue("MonkeySqueeze","SqueezeBoxPlayerNo") = 0 Then
formatCommand = "{""id"":1,""method"":""slim.request"",""params"":[""" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC") + """,[" + str1 + "]]}"
End If
If SDB.IniFile.IntValue("MonkeySqueeze","SqueezeBoxPlayerNo") = 1 Then
formatCommand = "{""id"":1,""method"":""slim.request"",""params"":[""" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC2") + """,[" + str1 + "]]}"
End If
If SDB.IniFile.IntValue("MonkeySqueeze","SqueezeBoxPlayerNo") = 2 Then
formatCommand = "{""id"":1,""method"":""slim.request"",""params"":[""" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC3") + """,[" + str1 + "]]}"
End If
If SDB.IniFile.IntValue("MonkeySqueeze","SqueezeBoxPlayerNo") = 3 Then
formatCommand = "{""id"":1,""method"":""slim.request"",""params"":[""" + SDB.IniFile.StringValue("MonkeySqueeze","SqueezeBoxMAC4") + """,[" + str1 + "]]}"
End If
End Function
'*************************************************************
'borrowed from a teknojunky - if you want the popups add them to this and then just call logme
Sub logme(msg)
Dim fso, logf
On Error Resume Next
Set fso = CreateObject("Scripting.FileSystemObject")
Set logf = fso.OpenTextFile(Script.ScriptPath&".log",ForAppending,True)
logf.WriteLine Now() & ": " & msg
Set fso = Nothing
Set logf = Nothing
End Sub
'*************************************************************
'Perl is taking the JSON strings directly into variables - "\" is a special character in perl to escape the following string
'wherever we have a "\" we need it to be "\\" in anything that goes to Perl (ie: anything that goes to SqueezeBox)
Function perlEscape(str1)
perlEscape = Replace(str1, "\", "\\")
End Function
'*************************************************************
Sub registerEvents
Call Script.RegisterEvent(SDB,"OnPlay","Event_OnPlay")
Call Script.RegisterEvent(SDB,"OnPause","Event_OnPause")
Call Script.RegisterEvent(SDB,"OnStop","Event_OnStop")
Call Script.RegisterEvent(SDB,"OnSeek","Event_OnSeek")
Call Script.RegisterEvent(SDB,"OnTrackEnd","Event_OnTrackEnd")
Call Script.RegisterEvent(SDB,"OnShutdown","Event_OnShutdown")
Call Script.RegisterEvent(SDB,"OnNowPlayingModified","Event_OnNowPlayingModified")
End Sub
'*************************************************************
Sub Event_OnNowPlayingModified
Dim MMcount
MMcount = SDB.Player.CurrentPlayList.Count
'logme("Now playing modified")
'logme("Aantal MM tracks: " & Cstr(MMcount))
'logme("Aantal LMS tracks: " & Cstr(LMScount))
If SqueezeBoxMode = "stop" Then
FillPlaylist
ElseIf MMcount = 0 Then
ResetPlaylist
ElseIf MMcount < LMScount Then
TracksDeleted(MMcount)
ElseIf MMcount > LMScount Then
TracksAdded(MMcount)
Else
TracksMoved
End If
End Sub
'*************************************************************
Sub FillPlaylist
'*** synchronize MM playlist with LMS playlist
Dim tempStop, Idx
'*** clear LMS playlist and stop shuffle!!
slimRequest(formatCommand("""playlist"", ""clear"""))
slimRequest(formatCommand("""playlist"", ""shuffle"", ""0"""))
'*** copy MM playlist - if any - to LMS
LMScount = SDB.Player.CurrentPlayList.Count
ReDim LMSpaths(LMScount)
'*** if playlist is empty we are done
If LMScount > 0 Then
tempStop = SDB.Player.isPlaying And (SDB.Player.PlayBackTime < 2000)
If tempStop Then
SDB.Player.pause
slimRequest(formatCommand("""stop"""))
End If
SendPlaylist
'*** jump to current song
Idx = SDB.Player.CurrentSongIndex
slimRequest(formatCommand("""playlist"", ""index"", """ + Cstr(Idx) + """"))
If tempStop Then
'*** Start playback after filling playlist
SDB.Player.Pause
ElseIf SDB.Player.isPlaying Then
'*** Synchronize LMS with current track
slimRequest(formatCommand("""time"", """ + CStr(SDB.Player.PlaybackTime*0.001) + """"))
If SDB.Player.isPaused Then SDB.Player.Pause
Else
'*** MediaMonkey is not playing
slimRequest(formatCommand("""stop"""))
End If
End If
EndOfTrack = False
End Sub
'**************************************************************
Sub SendPlaylist
Dim Progr, TrackPath, Song, n
'*** show progress bar
Set Progr = SDB.Progress
Progr.Text = SDB.Localize("Synchronising playlists...")
Progr.MaxValue = LMScount
'*** send playlist
For n=0 To LMScount-1
Set Song = SDB.Player.CurrentPlayList.Item(n)
TrackPath = CheckPath(Song)
LMSpaths(n) = TrackPath
slimRequest(formatCommand("""playlist"", ""add"", """ + perlEscape(TrackPath) + """"))
Progr.Value = n+1
Next
End Sub
'**************************************************************
Sub ResetPlaylist
SDB.Player.Stop
slimRequest(formatCommand("""stop"""))
slimRequest(formatCommand("""playlist"", ""clear"""))
ReDim LMSpaths(0)
LMScount = 0
End Sub
'**************************************************************
Sub TracksDeleted(MMcount)
Dim n, m, Song, TrackPath
'logme("Tracks deleted")
n = 0
Do While MMcount < LMScount
If n = MMcount Then
TrackPath = "***"
Else
Set Song = SDB.Player.CurrentPlayList.Item(n)
TrackPath = CheckPath(Song)
End If
If (TrackPath = LMSpaths(n)) Then
n = n+1
Else
LMScount = LMScount - 1
For m = n To LMScount - 1
LMSpaths(m) = LMSpaths(m+1)
Next
slimRequest(formatCommand("""playlist"", ""delete"", """ + Cstr(n) + """"))
End If
Loop
End Sub
'*************************************************************
Sub TracksAdded(MMcount)
Dim n, m, Song, TrackPath
'logme("Tracks added")
ReDim Preserve LMSpaths(MMcount) 'expand array, preserve content
Do
For n = 0 to MMcount -1
Set Song = SDB.Player.CurrentPlayList.Item(n)
TrackPath = CheckPath(Song)
If (TrackPath <> LMSpaths(n)) Then
slimRequest(formatCommand("""playlist"", ""add"", """ + perlEscape(TrackPath) + """"))
If n < LMScount Then
slimRequest(formatCommand("""playlist"", ""move"", """ + Cstr(LMScount) + """, """ + Cstr(n) + """"))
For m = LMScount To n+1 Step -1
LMSpaths(m) = LMSpaths(m-1)
Next
End If
LMSpaths(n) = TrackPath
LMScount = LMScount + 1
End If
Next
Loop While MMcount > LMScount
End Sub
'*************************************************************
Sub TracksMoved
Dim n, m, i, Song, TrackPath, tempPath
'logme("Tracks moved")
For n=0 To LMScount-1
Set Song = SDB.Player.CurrentPlayList.Item(n)
TrackPath = CheckPath(Song)
If TrackPath <> LMSpaths(n) Then
For m=n+1 To LMScount-1
If TrackPath = LMSpaths(m) Then Exit For
Next
For i=m To n+1 Step -1
LMSpaths(i) = LMSpaths(i-1)
Next
LMSpaths(n) = TrackPath
slimRequest(formatCommand("""playlist"", ""move"", """ + Cstr(m) + """, """ + Cstr(n) + """"))
End If
Next
End Sub
'*************************************************************
Sub unregisterEvents
Script.UnregisterEvents SDB
End Sub
'*************************************************************
'These are what the full JSON strings look like that need to be sent to slimRequest()
'formatRequest() fills in the first part and all you have to do is pick the RPC commands from http://svn.slimdevices.com/repos/slim/7.5/trunk/server/Slim/Control/Request.pm
'Note: there are cleaner ways of doing this - but this is quick and dirty. It just means that you have to use a lot of """ and etc in vbscript.
'This entire script is much easier to write in jscript but I don't know jscript at all so, shrug.
'{"id":1,"method":"slim.request","params":["00:04:20:17:06:xx",["status","-",1,"tags:cgABbehldiqtyrSuoKLN"]]}
'{"id":1,"method":"slim.request","params":["00:04:20:17:06:xx",["status","-",1,"tags:uB"]]}
'{"id":1,"method":"slim.request","params":["00:04:20:17:06:xx",["playlist","index",28]]}
'{"id":1,"method":"slim.request","params":["00:04:20:17:06:xx",["pause"]]}
'{"id":1,"method":"slim.request","params":["00:04:20:17:06:xx",[""playlist"", ""play"", ""D:\\MP3\\filename.mp3""]]}
'You can do ANYTHING you can do from the web interface via this RPC engine because you are directly calling the methods in Perl
'so you could add whole playlists and etc see the docs. Sky's the limit.