V1074 - Marantz NR1711 in Cast Button List [#19861]

[TheEmpathicEar]

In v1704, it seems as if my receiver, Marantz NR1711, finally appears in the list "Cast to". I checked the IP Address and they match. But, when I click on "Marantz NR1711", it does not seem to connect? The receiver does not prompt or seem to recognize the attempt to connect?
EDIT: I also added the port number in the "Cast to" entry for the receiver. The only difference I can see is the entry there has no "-" between Marantz and NR1711 unlike the entry in the Comcast xFi app.

[Peke]

Hi,
Have you tried to rename device if possible and loose - in Name?

[TheEmpathicEar]

Yes. I guess need to change something else?

[Peke]

Hi,
As last time, send log from MMA and try using MM5 for testing, then if thheded MM5 log wil be asked in order to compare MMA / MM5 behavior.

[TheEmpathicEar]

Hi,
As last time, send log from MMA and try using MM5 for testing, then if thheded MM5 log wil be asked in order to compare MMA / MM5 behavior.

I might wait until the next version, 1074+, and see what happens before further testing?

[rusty]

We're probably not going to get to this until we start working on 2.0.1.

-Rusty

[TheEmpathicEar]

We're probably not going to get to this until we start working on 2.0.1.

-Rusty

Are you referring to my issue? Can you give me any specifics about why? Somewhere around here, someone mentioned Marantz being different because it uses HEOS?

[rusty]

If it's a regression in DLNA functionality then we'll treat it more urgently, but afaik it's an issue specific to Denon/Marantz because there's something non-standard in their implementation.

Did this work in MMA 1.x for you?

-Rusty

[TheEmpathicEar]

If it's a regression in DLNA functionality then we'll treat it more urgently, but afaik it's an issue specific to Denon/Marantz because there's something non-standard in their implementation.

Did this work in MMA 1.x for you?

-Rusty

In 1.x, the receiver did not appear in the list when you click on the "Cast" button. I mentioned this somewhere else here. @Peke commented on the quality of Marantz receivers now vs in the past.

[Peke]

Hi,

@Peke commented on the quality of Marantz receivers now vs in the past.

I had tested Marantz with DLNA, but without HEOS. Guess what they worked

[TheEmpathicEar]

Hi,

@Peke commented on the quality of Marantz receivers now vs in the past.

I had tested Marantz with DLNA, but without HEOS. Guess what they worked

Well, I am using the Marantz NR1711 now. I was using the NR1509 prior to this [it was released around 2018].

[Peke]

Hi,
For test I had Marantz NA-11S1 and Marantz AV8801 (on repair) both from 2014.

[rusty]

If it's a regression in DLNA functionality then we'll treat it more urgently, but afaik it's an issue specific to Denon/Marantz because there's something non-standard in their implementation.

Did this work in MMA 1.x for you?

-Rusty

In 1.x, the receiver did not appear in the list when you click on the "Cast" button. I mentioned this somewhere else here. @Peke commented on the quality of Marantz receivers now vs in the past.

So it doesn't appear that there's a regression in functionality so we'll defer investigating until to post 2.0.

-Rusty

[TheEmpathicEar]

If it's a regression in DLNA functionality then we'll treat it more urgently, but afaik it's an issue specific to Denon/Marantz because there's something non-standard in their implementation.

Did this work in MMA 1.x for you?

-Rusty

In 1.x, the receiver did not appear in the list when you click on the "Cast" button. I mentioned this somewhere else here. @Peke commented on the quality of Marantz receivers now vs in the past.

So it doesn't appear that there's a regression in functionality so we'll defer investigating until to post 2.0.

-Rusty

I noticed that the xFi app that Comcast provides was complaining about multiple attempts to connect to the NR1711this past week? They were all from Belgium?

[TheEmpathicEar]

Hi,

@Peke commented on the quality of Marantz receivers now vs in the past.

I had tested Marantz with DLNA, but without HEOS. Guess what they worked

Can you explain this a bit more? I just updated MMA to 1079. My phone, S22+, has the Marantz receiver in the "Cast" list, but can not connect. Also, when I select Bluetooth the same. I can connect to my LG WebOS TV. But, the speakers in the TV are crap. Why were you able to connect to your Marantz receiver w/o HEOS?