Hi,
longtime mediamonkey user, mm5 gold, mma gold, mmremote pro...
how do i optimally configure WASAPI exclusive mode for use with my Focusrite Scarlet 2i2 soundcard? i have a nice amp and lovely monitor speakers but MM5 is delivering choppy sound with artefacts, glitches, micro-skips. i use Ableton, Winyl, VLC and other programs with flawless sound in WASAPI and ASIO with much smaller buffers -256/512, and when recording via ASIO even lower. only mediamonkey is affected by these glitches.
the focusrite soundcard has control software which can specify buffer size from 16-1024.
MM5 can also specify buffer size for event-driven exclusive mode.
even with buffer set to 1024 in both sound is poor.
i'm expecting to enable event-driven for exclusive and shared modes and set mediamonkey buffer to match Focusrite?
or should mediamonkey have a bigger/smaller buffer than the soundcard? or are there other settings i ccan tweak?
i've fiddled and tweaked and can't get a reliable sound.
thanks for any insight...
WASAPI exclusive settings
Moderator: Gurus
Re: WASAPI exclusive settings
Hi,
I do not have 2i2, but I have Solo (3rd gen) here is my settings (See Below) that works Flawlessly. Event Driven Exclusive do not Work Correctly due the Driver Timings. I had same issue with Sound forge 15 and Ableton 10 Live with some large String Instruments loaded with Kontakt. Once I disable Event-Driven mode all works.
FYI I understand Event Driven Mode for DAW apps buy I do see the need reason for forced Event Driven Mode for playback in Exclusive mode.

Please note that many many AMD MB manufacturers released updated BIOS due the buffering issues with USB DACs and choppy sounds (I use Beta BIOS for 9 Months now). NOTE: Focusrite was better handling buffers than my Tascam US 2x2.
Also check Focusrite site for updated Firmware/Driver as I needed to update to Focusrite Control 3.6.0.1822 and Driver to 4.65.5 in order to make all settings work after Windows 10 2004 upgrade.
I do not have 2i2, but I have Solo (3rd gen) here is my settings (See Below) that works Flawlessly. Event Driven Exclusive do not Work Correctly due the Driver Timings. I had same issue with Sound forge 15 and Ableton 10 Live with some large String Instruments loaded with Kontakt. Once I disable Event-Driven mode all works.
FYI I understand Event Driven Mode for DAW apps buy I do see the need reason for forced Event Driven Mode for playback in Exclusive mode.

Please note that many many AMD MB manufacturers released updated BIOS due the buffering issues with USB DACs and choppy sounds (I use Beta BIOS for 9 Months now). NOTE: Focusrite was better handling buffers than my Tascam US 2x2.
Also check Focusrite site for updated Firmware/Driver as I needed to update to Focusrite Control 3.6.0.1822 and Driver to 4.65.5 in order to make all settings work after Windows 10 2004 upgrade.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying



How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying



How to attach PICTURE/SCREENSHOTS to forum posts
Re: WASAPI exclusive settings
Hi,
Just for curiosity I tried to tweak Event Driven Mode (Pull Mode) and everything above 20ms works for me, but it is 80%+ stable only after 100-150 and PULL mode at 150ms work flawlessly.
It really depends on USB Port and how many clocks CPU steals for from PCIe Lanes and USB. That also explains why DAWs can have lower value because they are constantly front apps and have in most cases Realtime Process priority and ALL CPU cores Affinity.
Just for curiosity I tried to tweak Event Driven Mode (Pull Mode) and everything above 20ms works for me, but it is 80%+ stable only after 100-150 and PULL mode at 150ms work flawlessly.
It really depends on USB Port and how many clocks CPU steals for from PCIe Lanes and USB. That also explains why DAWs can have lower value because they are constantly front apps and have in most cases Realtime Process priority and ALL CPU cores Affinity.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying



How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying



How to attach PICTURE/SCREENSHOTS to forum posts