With multiple CD sets by a single artist, the default setting creates a separate folder for each disc, with each tack in each disc folder numbered from 1-X. Manually combining them in a single folder will result in duplicate track numbers. Is it possible to rip them into a single folder in correct order--disc 1-X--but with each track numbered sequentially, so that they play by disc order and number? I have a lot of classical and live recordings that I want to play from disc 1 track 1 to disc x track x in order.
Also, some CD sets have symphony 1 and 4 on disc 1 and 3 and 8 on disc 2, etc. I assume that these would have to be re-tagged manually to have them play in order?
Thanks for any help.
Multiple CD Albums
Moderator: Gurus
Re: Multiple CD Albums
Yes, you can configure through Masks how the files are created during Ripping. <Disc#> can be used in the filename instead of a folder.
There are different fields you can sort on, if that fails to do the trick you'd need to retag.
There are different fields you can sort on, if that fails to do the trick you'd need to retag.
Download MediaMonkey ♪ License ♪ Knowledge Base ♪ MediaMonkey for Windows 2024 Help ♪ MediaMonkey for Android Help
Lowlander (MediaMonkey user since 2003)
Lowlander (MediaMonkey user since 2003)
Re: Multiple CD Albums
I don't think I made myself clear. Example: The Magic of Jascha Heifietz has 3 discs. I want to rip them into a single folder, not a separate folder for each disc. I want to play them in the order they would play in a CD player carousel: disc 1 1-x; disc 2 1-x; disc 3 1-x. Is it possible to rip all 3 discs into one folder but have the tracks play in order they would as if they were played consecutively in a carousel?
Thanks.
Thanks.
Re: Multiple CD Albums
Hi,
Like as Lowlander said you just add <Disk #> to RIP destination mask eg. for multi disk RIPs I use "c:\Music\CD RIPS\<Album Artist> <Album> (<Year>)\<Disk #:2>-<Track #:2>. <Title>" that would end as "c:\Music\CD RIPS\Jascha Heifietz - The Magic of Jascha Heifietz (2016)\01-01. Concerto For Violin No 5 In A Minor, Op. 37 Grétry, I. Allegro Non Troppo.flac", "c:\Music\CD RIPS\Jascha Heifietz - The Magic of Jascha Heifietz (2016)\01-02. Concerto For Violin No 5 In A Minor, Op. 37 Grétry, II. Adagio.flac", Only thing I need to do after I insert CD I select all tracks on CD -> Edit properties, add Disk # and correct any wrong tags which is usually 3 second job.
NOTE as these are classical CDs I would suggest that after the rip I would edit track properties to get all information that are not supported by Audio CD tags. eg. use Auto-Tag or https://www.discogs.com/release/1078456 ... Remastered to Copy/Paste missing information.
Like as Lowlander said you just add <Disk #> to RIP destination mask eg. for multi disk RIPs I use "c:\Music\CD RIPS\<Album Artist> <Album> (<Year>)\<Disk #:2>-<Track #:2>. <Title>" that would end as "c:\Music\CD RIPS\Jascha Heifietz - The Magic of Jascha Heifietz (2016)\01-01. Concerto For Violin No 5 In A Minor, Op. 37 Grétry, I. Allegro Non Troppo.flac", "c:\Music\CD RIPS\Jascha Heifietz - The Magic of Jascha Heifietz (2016)\01-02. Concerto For Violin No 5 In A Minor, Op. 37 Grétry, II. Adagio.flac", Only thing I need to do after I insert CD I select all tracks on CD -> Edit properties, add Disk # and correct any wrong tags which is usually 3 second job.
NOTE as these are classical CDs I would suggest that after the rip I would edit track properties to get all information that are not supported by Audio CD tags. eg. use Auto-Tag or https://www.discogs.com/release/1078456 ... Remastered to Copy/Paste missing information.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying



How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying



How to attach PICTURE/SCREENSHOTS to forum posts
Re: Multiple CD Albums
Thanks for taking the time to reply. I appreciate the time you took to use my example. It was very helpful.
Is there a way to access Discogs db through MM or any 3rd party add on?
Thanks.
Is there a way to access Discogs db through MM or any 3rd party add on?
Thanks.
Re: Multiple CD Albums
Hi,
Unfortunately, there is no Addon for MM5 as MM4 addon was never ported and we can't make it due the licensing rules.
MM5 uses Musikbrainz search which is good for 90%+ of CDs.
As alternative you can use MM4 as portable to RIP CDs (same thing apply for MM4 too) and then scan RIP folder in MM5.
Unfortunately, there is no Addon for MM5 as MM4 addon was never ported and we can't make it due the licensing rules.
MM5 uses Musikbrainz search which is good for 90%+ of CDs.
As alternative you can use MM4 as portable to RIP CDs (same thing apply for MM4 too) and then scan RIP folder in MM5.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying



How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying



How to attach PICTURE/SCREENSHOTS to forum posts
-
WALHAL
Re: Multiple CD Albums
I did what you wanted to do by chance. I want to undo it, but this is how it can work the way you want.
1. I used dbPOWERAMP - batch ripper / cd ripper / 1 additional software comes included -but not used - called a reference package ( you need both softwares i think to do it) $48
2. I had a nimbie autoloader to rip my collection to wave format - but any disc drive would work with batch ripper - you would just load 1 by 1 by hand as many people do.
3. batchripper appears to show three different Discs ripped in batch ripper - it keeps track of how many individual discs you rip and gives each a sequential number, incase you need to find it and fix track errors etc. ( in a 3 cd beethoven song set) - ok.. It stores the files in the Music folder that media monkey or windows media etc uses for the standard library file location.
4. Rescan the media monkey library to update it in the FILE menu tab It recognizes information ripped by dbPOWERAMP - cover art and all. It can take some time for everything to show up...
5. Automatically - all 3 cd contents were all in one album icon in media monkey - even though three different ripped discs showed up in batch ripper - however, batch ripper put them all into one folder - which is why media monkey thought they were all only one album. it did not have duplicate track numbers - it somehow knew that one disc followed another in the set and created the right track number sequence.
5. I opened windows media player 10 too - it accessed the same Music folder info too - and also showed the 3 cd set combined into one album - again - because db put it all in one folder rather than 3 different ones.
This also happened on a 12 disc beethoven sonata set by barenboim. - They were grouped into two albums sonatas 1-15 and 16-32 as the two sets of 6 discs each were when released on cd.
1. I used dbPOWERAMP - batch ripper / cd ripper / 1 additional software comes included -but not used - called a reference package ( you need both softwares i think to do it) $48
2. I had a nimbie autoloader to rip my collection to wave format - but any disc drive would work with batch ripper - you would just load 1 by 1 by hand as many people do.
3. batchripper appears to show three different Discs ripped in batch ripper - it keeps track of how many individual discs you rip and gives each a sequential number, incase you need to find it and fix track errors etc. ( in a 3 cd beethoven song set) - ok.. It stores the files in the Music folder that media monkey or windows media etc uses for the standard library file location.
4. Rescan the media monkey library to update it in the FILE menu tab It recognizes information ripped by dbPOWERAMP - cover art and all. It can take some time for everything to show up...
5. Automatically - all 3 cd contents were all in one album icon in media monkey - even though three different ripped discs showed up in batch ripper - however, batch ripper put them all into one folder - which is why media monkey thought they were all only one album. it did not have duplicate track numbers - it somehow knew that one disc followed another in the set and created the right track number sequence.
5. I opened windows media player 10 too - it accessed the same Music folder info too - and also showed the 3 cd set combined into one album - again - because db put it all in one folder rather than 3 different ones.
This also happened on a 12 disc beethoven sonata set by barenboim. - They were grouped into two albums sonatas 1-15 and 16-32 as the two sets of 6 discs each were when released on cd.
Re: Multiple CD Albums
MediaMonkey considers files belonging to the same Album when the have a matching Album value and a matching Album Artist value.
Download MediaMonkey ♪ License ♪ Knowledge Base ♪ MediaMonkey for Windows 2024 Help ♪ MediaMonkey for Android Help
Lowlander (MediaMonkey user since 2003)
Lowlander (MediaMonkey user since 2003)